#Refind boot manager for serria how to
#Refind boot manager for serria install
#Refind boot manager for serria driver

Boot the PC with the DUET USB connected (usb 2.0 is recomended for DUET key)ДЄnd wait for it to reach the graphical boot manager.Installer off the win 10 usb key if the SSD/HD is empty or. Usb key as the boot device, it should load duet, and then start the win 10,

#Refind boot manager for serria install

If you know which usb port number the DUET key is placed in, installД«oth the DUET and the win 10 install usb key, and select the DUET

#Refind boot manager for serria driver

(8gb to 16 gb usb key required) make sure the installer is for UEFI,ДЄs a legacy win 10 install will not support the DUET/REFIND NVME Driver Install The WIN-10 ењ†4 ESD-USB installer key using the MS media creation tool.

Download the windows 10 media creation tool from microsoft and create.

#Refind boot manager for serria how to

вЂ» How to do a CLEAN install of WINDOWS 10ДЇirst create a DUET/REFIND USB key by following theДirections the tool displays (any 256k to 16gb usb key is recomended) Note that the installer must be UEFI, legacy windows does not support nvme the win 10 image from MS defaults to UEFI Ok, now that you have made the nvme boot loader USB key, it's time to install windows 10 So if you run a ssd speed check on a z600/800Дon't freak out at the lower speeds, as this is normal Would get on a pci-e 3.0 bus system like the Zx20 based workstations Which will limit the max speeds of the ssd to around one half the speeds you

6) Connect the USB on the target system and set Boot from USB as the first option in your system BIOS Boot orderДЄ quick note on nvme speeds, the Zx00 systems only have a pci-e 2.0 bus.

5) Copy the graphical boot manager REFIND by clicking on: REFIND.

4) format the selected drive by clicking on: FORMAT.

Connect the USB on the target system and set Boot from USB as the first option in your system BIOS Boot orderД«ooting the NVME drive from UEFI capable board - REFIND mass-storage without DUET - with USBSetup:.

7) Copy the optional graphical boot manager REFIND by clicking on: REFIND.

6) Copy the required DUET files by clicking on: DUET.

5) Make the selected drive bootable by clicking on: BOOT.

4) Format the selected drive by clicking on: FORMAT.

3) Remove all information and partitions from the drive by clicking on: CLEAN.

The following step will completely remove all information and partitions on the selected USB flash drive

2) Select the USB flash drive letter from the drop-down combo box.

1) Connect a USB flash drive and start the USBSetup application.

Z200/z400/z600/z800 (note: z800 must use the 2015 release of DUET/REFIND) not sure on other models Note that for the z800 you must use the version 2015 of DUET/REFIND due to it s triple channel memory controllerДЇor the z820 you only need to use REFIND as it's bios is already UEFIД«ooting the NVME drive from non-UEFI legacy board - DUET with optional REFIND - with USBSetup: If you have a earlier system that does not support booting from a nvme device, you can still add this feature via a software based loader on most of these earlier systems using the DUET/REFIND program(s)